1800 287 223 · info@astcad.com.au

Mechanical drafting services in Melbourne.

Mechanical drafting for Melbourne manufacturers, fabricators and equipment builders, drawn to AS 1100 from your sketches, models or markups. Our core team is based in Brisbane and works with Melbourne clients by phone, email and video call on 03 8370 3086.

Mechanical drafting services Melbourne - ASTCAD
Mechanical drafting for Melbourne projects, from single drawings to full packages.
Projects
650+
Standards
AS 1100
Quote
1 day
Since
2010
Software
SolidWorksInventorAutoCAD

Mechanical drafting for Melbourne manufacturers

ASTCAD provides mechanical drafting for Melbourne manufacturers, toolmakers and equipment builders: 2D detail and assembly drawings, 3D models and fabrication packages drawn to AS 1100.

Melbourne work leans towards production: components and assemblies that will be made more than once, where tolerances, finishes and revision control matter as much as the geometry. We model in SolidWorks or Inventor and issue drawings with geometric tolerances where the part needs them.

What we draw

2D detail and assembly drawings

Dimensioned views, sections, weld symbols and a bill of materials, drawn to AS 1100.

2D detail and assembly drawings →

3D part and assembly models

SolidWorks and Inventor models built for manufacture, with drawings taken from the model.

3D part and assembly models →

Fabrication and sheet-metal packages

Weldments and folded parts with flat patterns and DXF files for the laser or plasma.

Fabrication and sheet-metal packages →

Piping and P&IDs

Piping layouts, isometrics and P&IDs, including as-built updates from site markups.

Piping and P&IDs →

Reverse engineering

Existing parts measured or scanned and redrawn as models and manufacturing drawings.

Reverse engineering →

Jigs, fixtures and guarding

Tooling, machine guards and access platforms detailed for the workshop.

Jigs, fixtures and guarding →

What shapes mechanical drawings in Melbourne

Melbourne has one of the largest manufacturing bases in Australia, with clusters in Dandenong South, Campbellfield, Laverton North and Altona and an advanced-manufacturing precinct at Fishermans Bend. Typical work is transport and automotive components, food processing and packaging machinery, and precision sheet metal.

  • Plant design registration: certain plant, such as higher-hazard pressure vessels, tower cranes, larger gantry cranes and personnel hoists, must have its design registered with WorkSafe Victoria or another Australian work health and safety regulator, under the Occupational Health and Safety Regulations 2017. We draw the general arrangement, details and bill of materials in the form the design verifier needs.
  • Machine safety and access: guarding, interlocks and access platforms are detailed with AS 4024.1 and AS 1657 in mind.
  • Sheet metal: folded parts are issued with flat patterns, bend tables and DXF files matched to your supplier’s tooling.

Typical mechanical drafting jobs

The kind of work that comes through our mechanical team. Client work is covered by confidentiality, so project details are not published.

Inventor

Sheet-metal fabrication packages

Backing plates, mounts and trays with flat patterns and fixing details.
AutoCAD

Equipment cabinets

Plan, section and elevation sheets with internal duct and equipment layouts.
SOLIDWORKS

Agricultural and equipment components

Assemblies, skids and support structures modelled for manufacture, with DXF and STEP exports.
Inventor + SOLIDWORKS

Plant and machinery design

Conveyors, hoppers, bins and access stairs.
SOLIDWORKS

Fuel and transport tanks

Fabrication models and drawings for tanks, manways, stairs and platforms.
SOLIDWORKS

Conveyor fabrication detailing

Frames, drive and tail ends, legs and guards, issued with flat patterns.

How a job runs

Step 1

Send what you have

Sketches, marked-up PDFs, photos, models or existing drawings. We confirm the scope and quote within one business day.

Step 2

Drafting and checking

Drawn in your title block and layer standard, then checked against your source material before it is issued.

Step 3

Review and final issue

You mark up the review set, we pick up the comments and issue the final drawings and files.

Mechanical drafting in Melbourne: frequently asked

Do you have a Melbourne office?

Our core team is based in Brisbane. We run a dedicated Melbourne phone line (03 8370 3086) and work with Melbourne clients by phone, email and video call, with files exchanged the same day.

Can you prepare drawings for plant design registration with WorkSafe Victoria?

Yes, the drafting side of it. We prepare the general arrangement, detail drawings and bill of materials in the form a design verifier and the WorkSafe Victoria application need. The design verification statement itself has to come from a competent person who was not involved in producing the design.

What do you need to quote a mechanical drafting job?

Whatever you have: sketches, marked-up PDFs, photos, a sample part or existing CAD files. We come back with a no-obligation quote within one business day.

What files do we get back?

2D drawings as DWG and PDF, 3D models in native SolidWorks or Inventor format, and DXF or STEP files for your fabricator or machinist.

More on this service: mechanical drafting services across Australia. Other disciplines for local projects: CAD drafting services in Melbourne.

Send the drawings or a sketch.
Quote within one business day.

Call 03 8370 3086 or send your brief for a no-obligation quote.

Get a free quote — 1800 287 223