1800 287 223 · info@astcad.com.au

BIM services in Melbourne.

BIM for Melbourne architects, engineers and builders, modelled to LOD 100 to 400 from your drawings, markups or point clouds. Our core team is based in Brisbane and works with Melbourne clients by phone, email and video call on 03 8370 3086.

BIM services Melbourne - ASTCAD
BIM for Melbourne projects, from single drawings to full packages.
Projects
650+
Detail
LOD 100-400
Quote
1 day
Since
2010
Software
RevitNavisworksBIM 360AutoCAD

BIM for Melbourne architects

ASTCAD provides BIM services for Melbourne architects, engineers and builders: Revit models from 2D drawings, discipline models for coordination, clash detection and model exchange.

Melbourne teams usually bring us in for modelling capacity: a consultant whose 2D documentation now has to be a coordinated model, or a builder who needs services modelled before they go into the ceiling.

What we model

Revit models from 2D drawings

Architectural, structural and services models built from CAD plans or PDF sets.

Revit models from 2D drawings →

Clash detection

Discipline models federated in Navisworks, with a clash report your team can act on.

Clash detection →

Architectural BIM

Architectural models with plans, elevations, sections and schedules taken from the model.

Architectural BIM →

Structural BIM

Steel and concrete modelled for coordination and for shop drawings.

Structural BIM →

As-built models

Existing buildings modelled from drawings, site measurements or laser-scan point clouds.

Model exchange

IFC, NWC and 3D DWG exports for the wider project team.

What shapes BIM work in Melbourne

Victorian Government projects come with digital requirements. The Digital Asset Policy sets the digital practices and standards that departments and agencies apply when they plan, design and build, and it rests on the Victorian Digital Asset Strategy and ISO 19650. For a consultant or builder that means models, naming and data delivered the way the project’s BIM execution plan says.

  • Government work: see the Victorian Government’s Digital Asset Policy. We model to the execution plan and information requirements you are given.
  • Information management: naming, status and revision conventions follow the AS ISO 19650 series where the project calls for it.
  • Level of detail: LOD is agreed element by element before modelling starts, so the model is not over-built.

Typical BIM jobs

The kind of work that comes through our BIM team. Client work is covered by confidentiality, so project details are not published.

Revit

Models from 2D plans

Houses, alterations and commercial buildings modelled from architectural sheets or CAD plans.
Revit

Building services models

Mechanical, electrical and fire services modelled for coordination and issued as IFC and NWC.
Revit + Navisworks

Model exchange and federation

Models exported to IFC, STEP and 3D DWG, or federated in Navisworks for the wider project team.
Revit

Interior fit-out models

Fit-out levels, feature stairs and seating modelled for commercial interiors.
Revit

Scan to BIM

Laser-scan point clouds turned into as-built Revit models of factories and commercial buildings.
Revit

Revit families

Manufacturers’ equipment built as Revit families, with DXF and STEP exports.

How a job runs

Step 1

Send what you have

Sketches, marked-up PDFs, photos, models or existing drawings. We confirm the scope and quote within one business day.

Step 2

Drafting and checking

Drawn in your title block and layer standard, then checked against your source material before it is issued.

Step 3

Review and final issue

You mark up the review set, we pick up the comments and issue the final drawings and files.

BIM in Melbourne: frequently asked

Do you have a Melbourne office?

Our core team is based in Brisbane. We run a dedicated Melbourne phone line (03 8370 3086) and work with Melbourne clients by phone, email and video call, with files exchanged the same day.

Can you work to a project BIM execution plan?

Yes. Send the plan and any information requirements with the brief. We set up naming, worksets, levels of detail and exports to match, and say up front if something in it needs clarifying.

Can you build a Revit model from existing drawings or a laser scan?

Yes. We model from 2D CAD plans, PDF drawing sets and site measurements, and from laser-scan point clouds when an as-built model of an existing building is needed.

What do you need to quote a BIM job?

Whatever you have: sketches, marked-up PDFs, photos, a sample part or existing CAD files. We come back with a no-obligation quote within one business day.

What files do we get back?

The Revit model, sheets as PDF and DWG, and IFC or NWC exports for coordination.

More on this service: BIM services across Australia. Other disciplines for local projects: CAD drafting services in Melbourne.

Send the drawings or a sketch.
Quote within one business day.

Call 03 8370 3086 or send your brief for a no-obligation quote.

Get a free quote — 1800 287 223