BIM services in Melbourne.
BIM for Melbourne architects, engineers and builders, modelled to LOD 100 to 400 from your drawings, markups or point clouds. Our core team is based in Brisbane and works with Melbourne clients by phone, email and video call on 03 8370 3086.

BIM for Melbourne architects
ASTCAD provides BIM services for Melbourne architects, engineers and builders: Revit models from 2D drawings, discipline models for coordination, clash detection and model exchange.
Melbourne teams usually bring us in for modelling capacity: a consultant whose 2D documentation now has to be a coordinated model, or a builder who needs services modelled before they go into the ceiling.
What we model
Revit models from 2D drawings
Architectural, structural and services models built from CAD plans or PDF sets.
Revit models from 2D drawings →Clash detection
Discipline models federated in Navisworks, with a clash report your team can act on.
Clash detection →Architectural BIM
Architectural models with plans, elevations, sections and schedules taken from the model.
Architectural BIM →As-built models
Existing buildings modelled from drawings, site measurements or laser-scan point clouds.
Model exchange
IFC, NWC and 3D DWG exports for the wider project team.
What shapes BIM work in Melbourne
Victorian Government projects come with digital requirements. The Digital Asset Policy sets the digital practices and standards that departments and agencies apply when they plan, design and build, and it rests on the Victorian Digital Asset Strategy and ISO 19650. For a consultant or builder that means models, naming and data delivered the way the project’s BIM execution plan says.
- Government work: see the Victorian Government’s Digital Asset Policy. We model to the execution plan and information requirements you are given.
- Information management: naming, status and revision conventions follow the AS ISO 19650 series where the project calls for it.
- Level of detail: LOD is agreed element by element before modelling starts, so the model is not over-built.
Typical BIM jobs
The kind of work that comes through our BIM team. Client work is covered by confidentiality, so project details are not published.
Models from 2D plans
Building services models
Model exchange and federation
Interior fit-out models
Scan to BIM
Revit families
How a job runs
Send what you have
Sketches, marked-up PDFs, photos, models or existing drawings. We confirm the scope and quote within one business day.
Drafting and checking
Drawn in your title block and layer standard, then checked against your source material before it is issued.
Review and final issue
You mark up the review set, we pick up the comments and issue the final drawings and files.
BIM in Melbourne: frequently asked
Do you have a Melbourne office?
Our core team is based in Brisbane. We run a dedicated Melbourne phone line (03 8370 3086) and work with Melbourne clients by phone, email and video call, with files exchanged the same day.
Can you work to a project BIM execution plan?
Yes. Send the plan and any information requirements with the brief. We set up naming, worksets, levels of detail and exports to match, and say up front if something in it needs clarifying.
Can you build a Revit model from existing drawings or a laser scan?
Yes. We model from 2D CAD plans, PDF drawing sets and site measurements, and from laser-scan point clouds when an as-built model of an existing building is needed.
What do you need to quote a BIM job?
Whatever you have: sketches, marked-up PDFs, photos, a sample part or existing CAD files. We come back with a no-obligation quote within one business day.
What files do we get back?
The Revit model, sheets as PDF and DWG, and IFC or NWC exports for coordination.
More on this service: BIM services across Australia. Other disciplines for local projects: CAD drafting services in Melbourne.
Send the drawings or a sketch.
Quote within one business day.
Call 03 8370 3086 or send your brief for a no-obligation quote.