CASE STUDY – Mechanical Engineering Design and Drafting Services

DEVELOPMENT OF AN OPTIMIZED OIL STORAGE TANK DESIGN

Engineering Design & Drafting | CAE Services: CFD & FEA | Reverse Engineering | Rapid Prototyping | Product Design | Value Engineering | PLM Services | Technical Documentation

Case Study Highlights

DEVELOPMENT OF AN OPTIMIZED OIL STORAGE TANK DESIGN

Client Profile:

Technical Design Solutions Provider, Australia

Objective:

To develop a storage tank design to resist stress and deformation due to the weight of the oil.

Challenges:

  • Identify alternative design solutions for the existing storage tank
  • Ensuring the design’s geometrical feasibility for its actual application
  • Maintaining the stress and deformation values to minimum

Solution:

The existing storage tank design was modified by providing additional cross support bars at the tank side walls, which provided structural strength and reduced the stress and deformation values considerably.

Software Used : 

ANSYS Professional NLS 14.5

Designing a storage tank requires taking into account diverse factors, in order to avoid premature failure.

Out of the several loads the tank has to accommodate, the load acting due to weight of the fluid to be stored is of prime importance. The fluid weight also induces stress over the tank surface, resulting into deformation and ultimately increases the chances of tank failure.

The client requested a similar solution for the storage tank designed to store oil. The major concern from the customer’s end was to re-develop the storage tank geometry, having the ability to withstand stress and minimize deformation values.

oil storage tank design

The Solution:

The existing storage tank design was first analyzed to measure the stress and deformation values, considering the weight of the oil. Despite the stress values obtained were within the permissible range, the deformation was present and needed to be addressed.

To minimize the deformation values, a new tank design was proposed, which included the application of additional support bars at the tank walls. The additional support enhanced the storage tank strength with 45% reduction in deformation values.This solution can also be provided using Altair Hyperworks, Autodesk Simulation, NASTRAN, Abaqus, Pro- Mechanica, NX-CAE.

Benefits:

  • Improved storage tank design to withstand the oil weight effectively without deformation
  • Reduction in tank bulging due to excess strength provided by cross bars
  • Improved tank life due to minimized stress generation
  • Significant reduction in time required for physical tests

About Australian Design And Drafting Services

Australian Design and Drafting Services is a specialist firm providing engineering solutions to organizations across the globe. We have extensive experience in providing concept to manufacturing and post-manufacturing solutions to clients with a team of expert design engineers, CAD professionals and simulation analysts. We are based in Australia, serving 24×6, with a world-class infrastructure, hardware and software capabilities to address complex engineering problems with least turn around time.

TENDER SERVICE NEEDED? CALL US 1800 287 223

Australian Design & Drafting provides Free Tender Service to all our clients which will save you time, stress and thousands of dollars

NEED FREE CONSULTATION CALL US 1800 287 223

Australian Design & Drafting provides obligation Free Consultation Service for all your Drafting & Design requirements

NEED TECHNICAL STAFF? CALL US 1800 287 223

Australian Design & Drafting  provides multidisciplinary Design & Drafting Professionals

Australian Design & Drafting provides Free Tender Service to all our clients which will save you time, stress and thousands of dollars

Australian Design & Drafting provides obligation Free Consultation Service for all your Drafting & Design requirements

Australian Design & Drafting  provides multidisciplinary Design & Drafting Professionals