1800 287 223 · info@astcad.com.au

Electrical drafting services in Brisbane.

Electrical drafting for Brisbane electrical contractors, consultants and switchboard builders, drawn to AS/NZS 3000 from your sketches, models or markups. Our core team is based in Brisbane.

Electrical drafting services Brisbane - ASTCAD
Electrical drafting for Brisbane projects, from single drawings to full packages.
Projects
650+
Standards
AS/NZS 3000
Quote
1 day
Since
2010
Software
AutoCADAutoCAD ElectricalRevit

Electrical drafting for Brisbane electrical contractors

ASTCAD prepares electrical drafting for Brisbane electrical contractors, consultants and switchboard builders: single line diagrams, switchboard layouts, power and lighting layouts, schematics and as-built sets in AutoCAD.

Brisbane jobs range from a single switchboard layout to full as-built sets for commercial buildings, with security, communications and fire layouts drawn alongside power and lighting.

What we draw

Single line diagrams

Supply, distribution and protection shown clearly on one sheet, from your engineer’s design or markups.

Switchboard layouts

General arrangements, door layouts and schedules for main and distribution boards.

Power and lighting layouts

Outlets, luminaires, circuiting and switching drawn over the architectural background.

Control schematics

Motor starters, interlocks, E-stop circuits and PLC inputs and outputs.

As-built drawings

Red-line markups and site photos turned into a clean as-built set for handover.

Legacy drawing conversion

Old PDFs and paper electrical drawings redrawn as layered CAD files.

Legacy drawing conversion →

What shapes electrical drawings in South East Queensland

South East Queensland work covers commercial and health buildings, industrial sheds, solar and battery installations, and equipment built here for resources sites further north and west. Network connections follow the Queensland Electricity Connection Manual used by Energex and Ergon Energy.

  • Wiring rules: layouts and schedules are drawn to AS/NZS 3000 conventions, with cable sizes shown as your engineer specifies.
  • Regulator: the Electrical Safety Office regulates electrical work in Queensland under the Electrical Safety Act 2002.
  • Solar and batteries: layouts and single line diagrams for solar and battery systems are drawn with AS/NZS 5033 and AS/NZS 5139 in mind.

Typical electrical drafting jobs

The kind of work that comes through our electrical team. Client work is covered by confidentiality, so project details are not published.

AutoCAD

Building services as-builts

Security, electrical and mechanical services layouts drawn up as-built for commercial buildings.
AutoCAD

Solar and battery storage layouts

General layout drawings built from the equipment suppliers’ structure and foundation CAD.
AutoCAD

Switchboard layouts and single line diagrams

New drawings, or PDF-to-CAD conversion with red-line markups picked up.
AutoCAD

Control schematics

Supply, breakers, key transfer and E-stop circuits, pump relays and level alarm inputs.
AutoCAD

Fibre and communications diagrams

Line diagrams showing rack terminations, splice joints and cable runs through pits.
AutoCAD

Building electrical and fire services

Power and communications layouts, fire layouts and reflected ceiling plans.

How a job runs

Step 1

Send what you have

Sketches, marked-up PDFs, photos, models or existing drawings. We confirm the scope and quote within one business day.

Step 2

Drafting and checking

Drawn in your title block and layer standard, then checked against your source material before it is issued.

Step 3

Review and final issue

You mark up the review set, we pick up the comments and issue the final drawings and files.

Electrical drafting in Brisbane: frequently asked

Do you have a Brisbane office?

Yes. Our core team is based in Brisbane, and you can reach it on 07 3149 3547.

Can you draw to the Queensland Electricity Connection Manual?

Yes. Metering, supply and switchboard arrangements are drawn the way the Manual and the network require. Tell us whether the site is on the Energex or Ergon network when you send the brief.

Do you design the electrical installation or draft it?

We draft. Cable sizes, protection settings and maximum demand come from your engineer or licensed electrician. We produce the drawings to AS/NZS 3000 conventions and pick up your markups.

What do you need to quote an electrical drafting job?

Whatever you have: sketches, marked-up PDFs, photos, a sample part or existing CAD files. We come back with a no-obligation quote within one business day.

What files do we get back?

DWG and PDF in your title block and layer standard. Schedules can be supplied as tables in the drawing or as spreadsheets.

More on this service: electrical drafting services across Australia. Other disciplines for local projects: CAD drafting services in Brisbane.

Send the drawings or a sketch.
Quote within one business day.

Call 07 3149 3547 or send your brief for a no-obligation quote.

Get a free quote — 1800 287 223